Tactical

A lot of work went into developing our tactical series stocks. They were designed with one ultimate goal in mind,
ruggedness, stability, accuracy, and ergonomics. These stocks are engineered for the correct stiffness to weight ratio using
state of the art processes during manufacturing. The outer shells are made with 35% aircraft grade carbon fiber and 65% fiber
glass in multiple layers. They are hand laid with high temperature epoxy resins, placed under a vacuum, and heat cured to
obtain the perfect resin to fabric weight ratio. Standard configuration stocks come full inletted with a pillar set that is ready
to install at time of bedding. All of our tactical stocks come standard, painted with an industrial grade very durable,
polyurethane enamel paint which is impervious to most gun cleaning solvents. It is offered in 5 different colors, black, od
green, coyote tan, dessert tan, and sand. We also offer the option of many different camo patterns .

MCS-GAT This is our thumbhole tactical stock. This stock was a joint effort by MCS and GA Precision, to design a
thumbhole tatical stock. The standard weight is 3.5 lbs but can be had as light as 2.8 lbs. The MCS-GAT also comes in two
configurations, a right hand only that has a small swell on the left side for your thumb, and an ambidextrous version. The
forend is 1.75 wide at the tip and rounded to a beaver tail that is flat. The forend is also wide enough to accept a #7 barrel
which is about 1.125" diameter at the tip of the stock. It comes standard with a high cheekpiece and a adjustable spacer
type butt system, with a 1" Pachmyer Decel pad. It also has a butt hook that can be used to ride the bags or control your
rifle with your non-trigger hand. Rem 700 s/a is the standard inlet but others can be special ordered.

MCS-T This is our more traditional tactical stock. The standard weight is 2.5 lbs but can be had as light as 2.1 lbs. The
forend is 1.75 wide at the tip and rounded to a beaver tail that is flat. The forend is also wide enough to accept a #7 barrel
which is about 1.125" diameter at the tip of the stock. The MCS-T comes standard with a 1" Pachmyer Decel pad installed at
a length of pull at 13.5". This stock has a high cheekpiece and a nice palm swell. The forend and palm swell feature a heavy
molded in textured surface for a sure grip. Rem 700 s/a is the standard inlet but others can be special ordered.

MCS-T1 The standard weight is 3.4 lbs. But can be had as light as 2.4 lbs., and as heavy as 5 lbs.
The forend is 1.78” wide at the tip and will take barrels up to 1.350 inches in diameter. It comes
standard with a high cheekpiece and an adjustable spacer type butt system, with a 1" Pachmyer
Decel pad. It also has a butt hook that can be used to ride the bags or control the rifle with your
non-trigger hand. Rem 700 s/a is the standard inlet but others can be special ordered.

MCS-T50 This is our new 50bmg thumbhole tactical stock. This stock was designed for the new 1000 yard FCSA prone
class. It features a fully adjustable 3 way but pad system and a 2 way cheekpiece system. The cheekpiece is designed for
quick removal for cleaning, but at the same time giving the bolt plenty of clearance to operate. The barrel, action, magazine,
and trigger areas are molded into the shell of the stock. The only cuts in the shell are the bolt handle and pillar holes, done
during the bedding process. The forend is longer than most 50bmg stocks for more stability, but not to long to affect the
amount of swing on a moving target. The standard weight is 5.5 lbs but can be had as light as 4.5 lbs. The MCS-T50 comes in
right hand only, with a small swell on the left side for your thumb. The forend is 2.9" wide at the tip and has straight vertical
sides and a flat bottom. It also has a butt hook that can be used to ride the bags or controlling your rifle with your non-trigger
hand. The standard inlet is the Mcbros 50 BMG action in single shot, repeater, RP, and LP, but others can be special ordered.

.MCS-T2A AND T2 This stock comes in two versions the T2A which has a adjustable cheek and the
T2 with is non adjustable. The T2A comes standard with a adjustable cheek and Terry Cross's
hardware. Both come standard with a fixed 1" Pachmyer Decel pad. It can also be order with the
optional butt spacer system and a Decel pad .The standard weight for the T2A is 3.9 lbs. And the
T2 is 2.6 lbs. The forend is 2.40” wide at the tip and will take barrels up to 1.350 inches in
diameter. A lot of work went into the design of the back of the stock. It has a flat that is about
3/4" wide on the bottom with true running sides. This allows the stock to ride very straight and true
when using a rear bag.

.MCS-T4A AND T4 This is or newest tactical stock which comes in two versions the T4A which has
a adjustable cheek and the T4 with is non adjustable. The T4A comes standard with a adjustable
cheek and Terry Cross's hardware. Both come standard with a fixed 1" Pachmyer Decel pad.
They can also be order with the optional butt spacer system and a Decel pad .The standard weight
for the T4A is 4.2 lbs. And the T4 is 2.8 lbs. The forend is about 2.50” wide and will take barrels
up to 1.350 inches in diameter. The sides and bottom of the forend and the bottom of the butt
behind the hook are parallel with the bore. This allows the stock to ride very straight and true if
you want to use bags. The forend of the stock is only textured on the back half and we lengthened
the pistol grip about 1/4" longer compared to the T2 stock.

MCS-T3 This is one of or new designs, it is a good all around hunting / tactical stock. The standard
weight is 2.6 lbs but can be had as light as 2.2 Lbs. The forend is 2.40” wide at the tip and will take
straight taper barrels up to 1.350 inches in diameter.. The MCS-T3 comes standard with a 1" Pachmyer
Decel pad installed at a length of pull at 13.5". This stock has a high cheekpiece and a nice palm swell,
and a little longer grip than the MCS-T stock. The forend and palm swell feature a light molded in texture.